Avaya 580, 882 Deleting IPX Static Routes

Document No. 10-300077, Issue 2 16-11
Configuring IPX Routing
4. Click APPLY to save your changes, or CANCEL to restore previou s
settings.
5. To view or modify IPX Static Routes, expand the Routing > IPX >
Configuration folders in the navigation pane, and then click Static
Routes.
The IPX Static Routes Web page is displayed in the content pane. See
Figure 16-8.
*Note: It is also possible to create a static route by, making a RIP
source route from the IPX Static Route Table.
Figure 16-8. IPX Static Routes Web Page
CLI Command To create IPX static routes using the CLI, enter the following command in
Interface mode:
(config-if:<if-name>)# ipx route <network address | range>
<options>
Deleting IPX Static Routes
You can delete an IPX static route using either the Web Agent or the CLI.
Web Agent
Procedure To delete an IPX static route using the Web Agent:
1. In the navigation pane, expand the Routing > IPX > Configuration
folders, and then click Static Rout es.
The IPX Static Routes Web page is displayed in the content pane. See
Figure 16-8.
2. Select the checkbox for the IPX static route that you want to del et e fr om
the Select column.
3. Click DELETE to remove the IPX static route, or CAN CEL to restore
the IPX static route.