Baldor manual Current Parameter, MN1851 Operation

Current Parameter

Nominal and peak current values are automatically entered for the motor type. For manual tuning only, set the control current limit value to a percentage of the continuous current rating. For example, if your control is rated for 5A continuous current and you desire to limit the output current to 4A, enter 80%. If you wish to use the full output power of the control, enter 100%. Click “Download” when finished.

Figure 5-5 Current Parameter Screen

Velocity Parameter (Refer to Help→ “Unit Conversion from Linear to Rotary” for more information) Set the velocity parameters of the control:

Refer to “Velocity Parameters (RPM → m/s)” at the end of this section.

1.Scale factor - ratio of the input voltage to output speed.

2.Minimum velocity

3.Time to maximum velocity

Click “Download” when finished.

Figure 5-6 Velocity Parameter Screen

MN1851 Operation 5-9