Baldor MN1851 Figure A-14 Velocity Parameter Screen Drift, Figure A-15 Drift Parameter Screen

Velocity Parameter (Refer to Help→ “Unit Conversion from Linear to Rotary” for more information) Set the velocity parameters of the control:

Refer to “Velocity Parameters (RPM → m/s)” at the end of this section.

1.Scale factor - ratio of the input voltage to output speed.

2.Minimum velocity

3.Time to maximum velocity

Click “Download” when finished.

Figure A-14 Velocity Parameter Screen

Drift	If you know the input offset value of the control, you may enter the value manually.
	Otherwise, you may initiate automatic offset tuning and let the control measure
	and set this value. Click “Download” when finished.
	Figure A-15 Drift Parameter Screen

MN1851 Manual Tuning A-5