Baldor MN1851 manual

Set up Software Opening menu. If you have previously set up the motor and control parameters and saved them to a file, click FINISH then load the parameter file using the File

"Open selection. If you are setting up parameters for the first time, click NEXT to go to the Set up Software.

The General menu appears first. If you are using a stock Baldor linear motor, click the Motor tab to select the motor from the list and these parameters will be entered automatically for you. For a custom motor or a motor from another maker, the parameters must be entered manually on the General menu. First, click on “Motor” and then select “User Models” in the Library menu. Then, click “General” to return to this menu and enter all parameter values.

MN1851 Operation 5-5