Baldor MN1851 manual Section Specifications & Product Data, Identification

Section 7

Specifications & Product Data

Identification

Servo Control		LP X A X X X	X –E C 4 3
Lin+ Drive							Logic Supply (Option)
Input Voltage							0 = Internal 24VDC Supply
							3 = External customer provided
	1=115VAC
								24VDC required
	2=230VAC
	4=460/400VAC						Serial Port Type (Option)
Continuous Current Rating
					2 =			RS232
	A02 = 2 / 2.5 Amps				4 =			RS485
	A05 = 5 Amps
	A07 = 7.5 Amps						Bus (Option)
	A10 = 10 Amps
							N = None *
	A15 = 15 Amps
	A20 = 20 Amps
Enclosure Type							Feedback Device (Option)
							E=	Encoder
T=	Panel Mount w/internal power supply
P=	Panel Mount w/external power supply
S =	Panel Mount w/internal power supply
	(suitable for sharing with other controls).
Braking (Option)
R =	Requires external regen resistor			* Note: CAN bus is not available for use with
B =	Built-in regen resistor
O =	No internal regen capability					encoder feedback devices.

MN1851 Specifications & Product Data 7-1