Baldor MN1851 manual Section Accessories and Options, Cables, Connectors

Section 9

Accessories and Options

Cables	Shielded (Screened) cable provides EMI / RFI shielding and are required for
	compliance to CE regulations. All connectors and other components used must
	be compatible with this shielded cable.

Connectors

Mating Connector by connector number (for spare parts)

X1 – #ASR29714 (9 pin, Female) Phoenix Part No. MVSTBW2,5/9–ST

X1 – #ASR29715 (2 pin, Female) Phoenix Part No. MVSTBW2,5/2–ST

X3 – #ASR16000 (20 pin, Female) Phoenix Part No. MVSTBR2,5/20–ST

X6 – #ASR16215 (9 pin, Male)

X7 – #ASR16215 (9 pin, Male)

X8 – #ASR23345 (9 pin, Female)

X9 – #ASR25828A (15 pin, Male)

EMC AC Mains Filter AC filters remove high frequency noise to protect the control. These filters also prevent high frequency signals from being transmitted back onto the power lines and help meet CE requirements. To select the proper filter, you must know the voltage and current used by the drive and the impedance of the AC line.

For package size A, B and C (Model T – 1 Phase)

		Rated	Leakage	Weight
Filter Type	Rated Volts	Amps			Baldor No.
			Current mA	lbs (kg)
		@ 40° C
FN 2070 - 12	250	12	0.4	1.61 (0.73)	30548

For package size E, G and H (Model S – 3 Phase)

		Rated	Leakage	Power	Weight
Filter Type	Rated Volts	Amps		Losses		Baldor No.
			Current mA		lbs (kg)
		@ 40° C		Watts
FN 351 - 8 - 29	440	8	16	8.0	3.97 (1.8)	ASR24667
FN 351 - 16 - 29	440	16	16	9.0	3.97 (1.8)	ASR24668
FN 351 - 25 - 33	440	25	170	9.0	6.61 (3.0)	ASR24669
FN 351 - 36 - 33	440	36	170	10.5	6.61 (3.0)	ASR24670
FN 351 - 50 - 33	440	50	190	12.5	6.83 (3.1)	ASR24671

For package size E, G and H (Model T – 3 Phase Required for LP4xx)

		Rated	Leakage	Weight
Filter Type	Rated Volts	Amps			Baldor No.
			Current mA	lbs (kg)
		@ 40° C
FN 3258 - 30 - 47	480	30	184.7	2.64 (1.2)	ASR30521
FN 3258 - 7 - 45	480	7	172.4	0.11 (0.5)	ASR30522

MN1851 Accessories & Options 9-1