Baldor MN1851 manual There are 7 parts to the setup procedure Motor

There are 7 parts to the setup procedure:

Motor	First, select the “Motor Type”. Then select your specific “Motor ID”. All of the
	parameters will be entered if your motor is on the list. If your motor is not on the
	list, you must define a motor and all of its parameters. If your motor is not listed,
	select “User Models” in the Library menu and Then click the General tab and enter
	the motor parameters. Click “Download” when finished.
	Figure 5-2 Motor Selection Screen

Control	The “Control ID” is automatically selected. All of the parameters will be entered if
	your control is on the list. Click “Download” when finished.
	Figure 5-3 Control Selection Screen

5-6 Operation MN1851