Lights Problem and Solution
Carriage Error
f S
o B
o A
f P
The print head
carriage is caught by
jammed paper or
other foreign material
and cannot return to
the home position.
1. Remove any paper from the paper
path by hand.
If you are unable to r emove
jammed paper by hand, press the
E load/eject button until the pap er
is fully ejected. If the paper is no t
ejected, release the button the n
press it again. The paper roller
rotates in the opposite directi on.
Release the button aft er the paper
is fully ejected.
2. Turn off the printer. After a few
seconds, turn it on again.
If the error is not cleared, contact
your dealer.
Unknown Printer Error
f S
f B
f A
f P
An unknown printer
error has occurred. Turn off the printer, and after a few
seconds, turn it on again. If the error
is not cleared, contact your dealer.
o = on,
n = off,
f = flashing
Status Monitor

If you are printing with Windows 95 or a Macintosh, you can

use the Status Monitor 2 (for Windows 95) or StatusMonitor

(for Macintosh) to check the printer’s current status . For more

details, see Chapter 4, “Using the Printer Software for

Windows”, or Chapter 5, “Using the Printer Software for

Macintosh.”

LEaster10 Ref. Guide
Rev.C
A5 size Chapter 9
1-07-98 DR, pass 2
9-4 Troubleshooting