10. Select your printer in the dialog box below and follow the
on-screen instructions.
Note for Windows NT 4.0 users
If your printer does not print correctly as a remote printer, the
following procedure may help you solve the problem.
1. Install the Windows NT 4.0 printer software in your
computer as described on page 2-14.
2. Click Start, and select Settings and Printers.
3. Right-click the icon of your printer, and click Properties.
4. Select a printer port other than LPT1 in the Port menu.
5. From the DOS prompt, type the network path to your printer.
For example, type the following:
C:\net use lpt2: \\epser ver\printer
Then press the Ent er key. If you selected a port other than
“lpt2” in step 4, substitute this port for "lpt2" in the
command above. You should also substitute the name of
your print server for "epserver", and the name of the
printer, as defined on the print server, for "printer".
6. Restart your computer.
Note:
If you need to cancel this setting, follow the instructions above
and type C:\net use lpt2: /d in step 5.
Select your printer fig4
Windows
2
R
Easter10 Ref. Guide
Rev.C
A5 size Chapter 2
1-07-98 DR, pass 3
Getting Started 2-25