AGM (Alternate Graphics Mode)
When AGM is on, the printer can use high-resolution 24-pin graphics
commands. The default is off. This feature is available wh en yo u select
IBM X24E emulation as the Software setting.
Character table
Character tables contain the characters and sym bol s used in different
languages. The printer prints text based on the selec t ed character table.
For the available character tables, see Appendix C.
Auto line feed
When the Auto line feed feature is on, each carriage return (CR) code is
accompanied by a line feed (LF) code. If your printed text is unex pectedly
double-spaced, set this feature to Off. If text lines print on top of each
other, set it to On.
Network I/F mode
If your printer is connected to a single computer, leave t his feature off. If
you want to share the printer with another computer, turn this feature on.
When this feature is on, data may be present in the printer’s buffer even
though the printer is not printing. Always make sure the prin te r does not
receive data before turning off the printer.
Loading position
If you want to print more lines on a page, set this f eature to 3 mm. If you
set the top margin with your software, that setting is added to the
default-setting value.
Economy
When Economy mode is on, the printer uses less ink by printing fewer
dots per characte r. Use this mode f or rough drafts o nly.
Parallel I/F transfer rate
This setting specifies the I/F transfer rate. For most printing, leave this
setting set to Fast. If you encounter problems, set it to Normal.
LEaster10 Ref. Guide
Rev.C
A5 size Appendix A
1-07-98 DR, pass 1
A-6 Using the Printer with DOS