5. After making your changes, exit the default-setting mode by turning off
the printer.
Note:
You may exit the default-setting mode a ny time by turning off the printer.
Any changes you have made remain in effect until you c hange them again.
If you want to check the current default settings, enter the d efault-setting
mode again and print the current settings. The current settings are indicated
with arrows.
Selecting fonts
Your printer has eight built-in character fonts including two E PS ON font s:
EPSON Roman T and EPSON Sans Serif H. (Roman T is similar to the
Times font; Sans Serif H is similar to Helvetica )
To select a font, enter the default-setting mode. See “Changing the defaul t
settings” on page A-7.
Note:
Font selections you make with your software override your prin t er ’s control panel
selections. For best resu lts, use your software t o select fonts.
The table below shows the available fonts.
Fonts Sample
EPSON Courier
EPSON Roman T
EPSON Sans Serif H
EPSON Roman
EPSON Sans Serif
EPSON Prestige
EPSON Script
Draft
LEaster10 Ref. Guide
Rev.C
A5 size Appendix A
1-07-98 DR, pass 1
A-8 Using the Printer with DOS