Changing the default settings

To change the printer’s default settings, use the control pa nel buttons; the
control panel lights show your selections.
1. Make sure the printer is turned off and paper is loaded in the sheet
feeder.
Note:
Use paper at least A4 (210 mm/8.27 inches) size or wider. Otherwise, the
print heads will spray ink directly onto th e platen, which could mar future
printouts.
2. Hold down the
X cleaning button and turn on the printer to enter the
default-setting mode.
The printer loads a sheet of paper and prints a brief sum m ary and
instructions. It instructs you to select the language that you wan t
messages printed in (English, French, German, Italian, or Spa nish).
3. Press the
Y cleaning button until the following lights indicate the
language of your choice:
Language
S
B
A
English
n
n
n
French
o
n
n
German
f
n
n
Italian
n
o
n
Spanish
o
o
n
o = On,
n = Off,
f = Flashing
4. Press the
X cleaning button to print the current default settings and
the next instructions in the language you selected. The printed
instructions include submenu tables that list all of the settings you
can change and show you how the control panel lights appear for
each selection. Use the instruction sheets to change the settings from
the control panel.
A
R
Easter10 Ref. Guide
Rev.C
A5 size Appendix A
1-07-98 DR, pass 1
Using the Printer with DOS A-7