Using Your Printer on a Network To use your printer on a network, you need to set up your
printer as a network printer. Setting up for a network must be
done from the host computer first, and then from the client
computer.
Host: Computer to which the printer is connected
Client: Any computer on the network which will use the printer
With Windows 95
To set up the host computer, see your Windows 95 manual. To
set up your computer as a client computer to use the printer on
a network, see below.
1. Make sure the printer software is installed. See page 2-14, if
necessary.
2. Double-click the My Computer icon.
3. Double-click the Printers folder.
4. Right-click the icon of your printer, and click Properties.
5. Click the Details tab. Then click the Add Port button.
Click this tab to
see this window
Then click here net800
Windows
2
R
Easter10 Ref. Guide
Rev.C
A5 size Chapter 2
1-07-98 DR, pass 3
Getting Started 2-21