Before using the printer software, be sure to read the README
file located in the EPSON (Printers) folder. For information on
opening and using the software, see “Printing With Windows”
in Chapter 3.
Installing in Windows 95 (using plug-and-play)Follow these steps to install the printer software using
Windows 95 plug-and-play capabilities.
Note:
To install the printer software using Windows 95 plug-and-play
capabilities, your computer’s parallel port must be an IEEE 1284
compatible, bidirectional parallel port. See your computer
documentation for more information.
1. Make sure the printer is connected to the computer’s parallel
port.
2. Turn off your printer and computer, if necessary.
3. Turn on the printer first; then turn on the computer. Your
computer begins loading Windows 95.
4. If you defined a password, enter it at the prompt. You see
the New Hardware Found screen.
hard01
LEaster10 Ref. Guide
Rev.C
A5 size Chapter 2
1-07-98 DR, pass 3
2-16 Getting Started