Note:
If you want the Status Alert dialog box to appear in front of other
windows on the desktop, right-click the background monitoring icon
and choose Show on Top.
Installing the Status Monitor 2 utility
Note:
If you installed the Status Monitor 2 utility when you installed the
printer software, you do not need to install it again.
To use the Status Monitor 2, you need to install the software as
described below:
1 Make sure Windows 95 is running. Insert the printer
software CD-ROM in the CD-ROM driver. (For printer
software floppy disk users, insert the floppy disk in the
floppy disk drive.)
2 If a dialog box appears, click Quit.
3 Click Start, and select Run.
4Type
D:\ and specify your preferred language (see page 2-17)
followed by \status2 in the box.
If your CD-ROM uses a drive letter other than "D", substitute
the appropriate letter. If you use the floppy disk version,
substitute the letter of the floppy disk drive.
5 Click OK. The installation starts. Follow the instructions on
the screen.
Windows
4
R
Easter10 Ref. Guide
Rev.C
A5 size Chapter 4
1-07-98 DR, pass 2
Using the Printer Software for Windows 4-27