Extron electronic 450 manual Command and Response Table for SIS Commands

X1@ = Video/audio mute:			0 = no mutes	2 = audio mute
			1 = video mute	3 = video and audio mute
X1# =		Sync frequency	xxx.xx (frequency in Hz [V] or kHz [H])
X1$ = Connection status			0 = no input connected	1 = input connected
X1%	= RGB delay interval		Delay in 1/2 second increments (10 maximum)
X1^ =		Group # (for I/O grouping)	1 through 4 groups (0 = no group)
X1& =		Inputs	Total number of inputs for this switcher
X1*	=	Outputs	Total number of outputs for this switcher
X1( = Part number			60-nnn-nn
X2)	=	Firmware version number to second decimal place (x.xx)
X2! =		Verbose firmware version-description-upload date/time.
			See the Query controller firmware version (verbose) command on page 105.
X2@ =		Voltage	Positive or negative voltage and magnitude
X2# = Temperature			Degrees Fahrenheit
X2$ = Fan speed			RPM

Command and Response Table for SIS Commands

Command Function	SIS Command	Response	Additional description
	(Host to Unit)	(Unit to Host)

Create Ties

NOTES:

•Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&03*03%4*8$.

•The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.

•The & tie command for RGB and the % tie command for video can be used interchangeably on the matrix switchers.

Tie input video and audio to output	X!*X@!	OutX@•InX!•All]
Example:	1*3!	Out03•In01•All]
Tie input video (RGB) only to output	X!*X@&	OutX@•InX!•RGB]
Example (see last Note bullet,	10*4&	Out04•In10•RGB]
above):
Tie input video only to output	X!*X@%	OutX@•InX!•Vid]
Example (see last Note bullet,	7*5%	Out05•In07•Vid]
above):
Tie input audio only to output	X!*X@$	OutX@•InX!•Aud]
Example:	24*4$	Out04•In24•Aud]
Quick multiple tie	E+QX!*X@!...X!*X@$}	Qik]
Example:	E+Q3*4!3*5%3*6$}	Qik]

Tie the input X! video and audio to output X@.

Tie input 1 video and audio to output 3. Audio breakaway.

Tie input 10 RGB to output 4.

Audio breakaway.

Tie input 7 video to output 5.

Audio breakaway.

Tie input 24 audio to output 4.

Tie input 3 video and audio to

output 4, tie input 3 video to output 5, and tie input 3 audio to output 6.

Tie input to all outputs, video and	X!*!	InX!•All]
audio
Example:	5*!	In05•All]
Clear all ties	0*1	In00•All]
Tie input to all outputs, RGB (video)	X!*&	InX!•RGB]
only
Example (see last Note bullet,	8*&	In08•RGB]
above):
Tie input to all outputs, video only	X!*%	InX!•Vid]
Example (see last Note bullet,	10*%	In10•Vid]
above):
Tie input to all outputs, audio only	X!*$	InX!•Aud]

Tie input 5 video and audio to all outputs.

Audio breakaway.

Tie input 8 RGB to all outputs.

Audio breakaway.

Tie input 10 video to all outputs.

Audio breakaway.

NOTE: X! = Input number (for tie)	00	– 16 or 32	(00 = untied)
X@ = Output number	01	– 16 or 32

CrossPoint and MAV Series Matrix Switchers • Programming Guide 95