Download the Startup Page
Access the switcher using HTML pages as follows:
1.Start the Web browser program.
2.Click in the browser Address field.
3.Enter the Matrix IP address in the Address field of the browser.
NOTE: If the local system administrators have not changed the value, the factory- specified default, 192.168.254.254, is the correct value for this field.
4.If you want the browser to display a page other than the default page (such as a custom page that you have uploaded), enter a slash (/) and the file name to open.
NOTES:
•The Address field of the browser should display the address in the following format: <xxx.xxx.xxx.xxx>/<optional_file_name>.html.
•The HTML language reserves certain characters for specific functions (see Special Characters on page 109).
5.Press the keyboard <Enter> key. The switcher checks to see if it is password protected.
If the switcher is not password protected, it checks and downloads the HTML pages (proceed to step 7).
If the switcher is password protected, the switcher downloads the Enter Network Password dialopg box (see figure 81).
Figure 81. Enter Network Password Dialog Box
NOTE: A User name entry is not required.
6.Click in the Password field and type in the appropriate administrator or user password. Click the OK button.
7.The switcher checks several possibilities, in the following order, and then responds accordingly:
•Does the address include a specific file name, such as
192.168.254.254/<file_name>.html?
If so, the switcher downloads that HTML page.
•Is there a file in the switcher memory that is named “index.html”?
If so, the switcher downloads “index.html” as the default startup page.
•If neither of the above conditions is true, the switcher downloads the factory- installed default startup page, “nortxe_index.html” (see figure 82 on the next page), also known as the System Status page.
CrossPoint and MAV Series Matrix Switchers • HTML Operation 132
