Extron electronic 450 manual Windows Buttons, Drop Boxes, and Trash Can, Windows Menus, File menu

Windows Buttons, Drop Boxes, and Trash Can

The buttons, drop boxes, and trash can on the right side of the Matrix Switchers Control Program window perform the following functions:

Power — Unavailable for CrossPoint and MAV matrix switchers.

Executive Mode — Allows you to lock out front panel operations, except for the view-only mode functions. Click the button to cycle between Lock mode 0 (the indicator is white), Lock mode 1 (the indicator displays red), and Lock mode 2 (orange).

NOTE: See Setting the Front Panel Locks (Executive Modes) on page 75 for more information on the Lock modes.

Rooms menu — Displays a list of up to 10 rooms. You can select a room from the list to display it in the window.

NOTE: A Room is a subset of outputs that are logically related to each other, as determined by the operator. The matrix switcher supports up to 10 rooms, each of which can consist of from 1 to 16 outputs.

Presets menu — Displays a list of up to 32 global presets and up to 100 room presets (10 rooms x 10 presets per room). You can select a preset from the list to display it in the window and either activate it (Go) or delete it (Delete).

Go — Activates the selected preset as the current configuration.

Save as ... — Allows the current set of ties to be saved as a preset. Enter the preset number when prompted to do so.

Delete — Allows the current preset to be deleted.

Changes – Take — Allows you to execute any potential changes made to the displayed configuration.

Changes – Cancel — Returns to the previous screen, undoing any changes you have made.

Trash can — Drag and drop from an input or output button to the trash can to erase all ties associated with that input or output.

Windows Menus

File menu

Save Matrix settings as ... — Saves a complete set of up to 64 presets, rooms, room presets, and preset names plus the last active setting (preset 0), to a file. Saved settings include assigned icons and icon captions.

Restore Matrix settings from ... — Loads and activates a previously saved setting file.

Save This-Session’s settings — Saves the current assigned icons and icon captions.

Restore Last-Session’s settings — Loads the icons and icon captions that were saved during the last session. If you saved changes from the previous session to disk, the last time you exited the program, the ties from that session are also loaded.

Select printer ... — Selects the target printer.

Print tie map — Prints the tie set that is displayed on the screen. Exit — Closes the Matrix Switchers Control Program.

CrossPoint and MAV Series Matrix Switchers • Matrix Software 124