Extron electronic 450 manual Example 2 Add a video tie to a set of video and audio ties

The current configuration (see figure 33) is now input 5 video and audio are tied to output 3, output 4, and output 8

Figure 33. Final Configuration, Example 1

Example 2: Add a video tie to a set of video and audio ties

In the following example, a new video tie is added to the current configuration. The example shows the front panel indications that result from your actions.

NOTE: This example assumes that you have performed example 1.

1.Clear all selections: Press and release the Esc button.

2.Select video only for the tie: Press and release the RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button and the Audio button as necessary to light Video

only.

I / O

VIDEO AUDIO

Press the RGBHV or Video button to toggle on and off. The button lights green when selected.

Press the Audio button to toggle on and off.

The button is unlit or background illuminated when deselected.

3.Select an input: Press and release the Input 5 button.

Press and release the Input 5 button.

The button lights green to indicate that video outputs can be tied to or untied from this input.

1 2 3 4 5 6 7 8 16

17 18 19 20 21 22 23 24 32

I

N P U T S

The Output 3, Output 4, and Output 8 buttons light green to indicate the RGBHV or video ties created in example 1.

1 2 3 4 5 6 7 8 16

17 18 19 20 21 22 23 24 32

O U T P U T S

4.Select the output: Press and release the Output 1 button.

CrossPoint and MAV Series Matrix Switchers • Operation 44