Extron electronic 450 manual EX11X12...X1nI GriX11X12X13...X1n

Command and Response Table for SIS Commands (continued)

Command Function			SIS Command													Response																				Additional description
			(Host to Unit)													(Unit to Host)
I/O Grouping
	NOTE: The group that is assigned in each of the following I/O grouping commands (X1^) must be 1, 2, 3, 4, or 0 (not grouped).
	Write input grouping		EX1^1X1^2...X1^nI}													GriX1^1X1^2X1^3...X1^n]
																																				Each X1^ entry is the group number
																																				assigned to an input position, starting
																																				from input 1. n = the maximum
																																				number of inputs for this model.
	Example: CrossPoint 450 Plus 3232		E40...33I}													See below.
	Input 1 in group 4						Input 2 not grouped																																											Input 32 in group 3
	Response #s = group: Gri
		4 0 1 3 3 0 0 0 0 4													4 4 4 1 1 2 2 1 2																					2 3 3 3 3 2 1														2 2 3 3 3 3
	Input:	01		02	03	04		05	06	07	08	09		10		11		12		13		14		15		16		17		18			19		20			21		22		23		24		25			26			27		28		29		30		31		32
																																				Input 1 - group 4,
																																				input 2 - group 0 (ungrouped), ... input
																																				31 - group 3,
																																				input 32 - group 3.
	Write output grouping		EX1^1X1^2...X1^nO}													GroX1^1X1^2X1^3...X1^n]
																																				Each X1^ entry is the group number
																																				assigned to an output position, starting
																																				from output 1. n = the maximum
																																				number of outputs for this model.
	Read input grouping		EI}													X1^1X1^2X1^3...X1^n]																				Each X1^ entry is the group number
																																				assigned to an input position, starting
																																				from input 1. n = the maximum
																																				number of inputs for this model.
	Example: MAV Plus 2424		EI}													See below.
													Input 1 in group 1														Input 9 not grouped																									Input 24 in group 3
									Response = group: 1 1 1 3 3 0 0 0 0 4 4 4 4 1 1 2 2 1 2 2 3 3 3 3
														Input:			01		02		03		04		05		06		07		08	09		10			11		12		13		14		15		16	17			18		19		20		21		22		23		24
	Read output grouping		EO}													X1^1X1^2X1^3...X1^n]																				Each X1^ entry is the group number
																																				assigned to an output position, starting
																																				from output 1. n = the maximum
																																				number of outputs for this model.
NOTE: X1^ = Group number (for I/O grouping)								1 through 4 groups (0 = no group)

CrossPoint and MAV Series Matrix Switchers • Programming Guide 102