Extron electronic 450 manual Viewing the Configuration

The current configuration (see figure 35) is now:

•Video — Input 5 video is tied to output 1, output 3, output 4, and output 8.

•Audio — Input 5 audio is tied to output 3 and output 8.

Figure 35. Final Configuration, Example 3

Viewing the Configuration

The current configuration can be viewed using the front panel buttons. The View-onlymode prevents inadvertent changes to the current configuration. View-only mode also provides a way to mute audio outputs (see Muting and Unmuting Audio Outputs on page 60).

View the current configuration as follows:

1.Press the Esc button to clear any input button indications, output button indications, or control button indications that may be on.

2.Press and release the View button. All of the buttons light for outputs that are not tied as follows:

•Amber: No tied video or audio input

•Green: No tied video input

•Red: No tied audio input

If you press an output button for which there are no ties, the output buttons light for all outputs without ties.

3.Select video, audio, or both to view by pressing the RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button, Audio button, or both.

CrossPoint and MAV Series Matrix Switchers • Operation 47