Extron electronic 450 manual Resets

Command and Response Table for SIS Commands (continued)

Command Function	SIS Command	Response	Additional description
	(Host to Unit)	(Unit to Host)

Resets

Reset global presets and names Reset one global preset Reset room map

Reset individual room

Reset all room presets and names

Reset individual room preset and name

Reset RGB delays Reset audio input levels

Reset audio output levels

Reset all mutes

Reset whole switcher

Absolute reset, including IP settings

Absolute reset, excluding IP settings

EZG}	Zpg]
EX(ZG}	ZpgX(]
EZR}	Zpr]
EX1)ZR}	ZprX1)]
EZP}	Zpp]
EX1)*X(ZP}	ZppX1)*X(]
EZD}	Zpd]
EZA}	Zpa]
EZV}	Zpv]
EZZ}	Zpz]
EZXXX}	Zpx]
EZQQQ}	Zpq]
EZY}	Zpy]

Clear all global presets and their names. Clear global preset X(.

Clear all room definitions. Delete room X1).

Clear all room presets and names.

Clear an individual room preset and name.

Reset all RGB delays to 0.0 seconds.

Reset all audio input levels (gain and attenuation) to 0 dB.

Reset all audio output levels (volume) to 100% (no attenuation).

Reset all audio outputs to unmuted.

Clear all ties and presets, reset all audio gains to 0 dB, and reset volume to 100%.

Similar to Reset whole switcher, plus clear the IP address to 192.168.254.254 and subnet mask to 255.255.000.000.

Similar to Absolute reset, including

IP settings (EZQQQ}), but excludes the following IP settings: IP address, subnet mask, gateway address,

unit name, DHCP setting, and port mapping (telnet, web, and direct address).

NOTE: X( = Global or room preset number 00 - 32, 10 maximum for a room preset (00 = current configuration for view only) X1) = Room number (for room presets) 10 max. (Each can have up to 10 presets (X(s) assigned.)

CrossPoint and MAV Series Matrix Switchers • Programming Guide 104