Extron electronic 450 manual Example 3 Remove a tie from a set of ties

Press and release the Output 1 button.

The button blinks green to indicate that only the selected RGBHV or video input will be tied to this output.

1	2	3	4	5	6	7	8	15 16		O
										U
										T
										P
17	18	19	20	21	22	23	24	31	32	U
										T
										S

C O N T R O L

ENTER PRESET VIEW ESC

The Enter button blinks green to indicate the need to confirm the change.

5.Confirm the change: Press and release the Enter button.

Press the Enter button to confirm the configuration change.

ENTER

All input buttons and output buttons return to unlit or background illumination.

The Enter button returns to unlit or background illumination.

The current configuration (see figure 34) is now:

•Video — Input 5 video is tied to output 1, output 3, output 4, and output 8.

•Audio — Input 5 audio is tied to output 3, output 4, and output 8.

Figure 34. Final Configuration, Example 2

Example 3: Remove a tie from a set of ties

In the following example, an existing tie is removed from the current configuration. The example shows the front panel indications that result from your actions.

NOTE: This example assumes that you have performed example 1 and example 2.

1.Clear all selections: Press and release the Esc button.

2.Select audio only for the tie: Press and release the RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button and the Audio button as necessary to light Audio only.

I / O

RGBHV AUDIO

Press the RGBHV or Video button to toggle on and off. The button is unlit or background illuminated when deselected.

Press the Audio button to toggle on and off. The button lights red when selected.

3.Select an input: Press and release the input 5 button.

CrossPoint and MAV Series Matrix Switchers • Operation 45