Extron electronic 450 manual Rear Panel Reset Operations

3.Change a value: Press and release the button that relates to the desired value.

Press and release the button(s) to configure the port as

follows:
Baud rate:
Enter — 9600	Preset — 19200
View — 38400	Esc — 115200
Serial protocol:
RGBHV or Video — RS-232	Audio — RS-422/RS-485

The selected buttons blink and the others remain lit.

In this example, the port is set to RS-422 at 38400 baud.

C O N T R O L

ENTER PRESET VIEW ESC

I / O

RGBHV AUDIO

4.Exit the Serial Port Selection and Configuration mode: Press and release an output button.

Press and release an	All Control and I/O buttons return to unlit or background illumination.
input or output button.
		C O N T R O L	I / O

5 ENTER PRESET VIEW ESC RGBHV AUDIO

Rear Panel Reset Operations

The rear panel has a Reset button that initiates various levels of resets, dependant on the switcher model and defined in the table below:

Switcher model or	Reset	Resets
MAV Plus switcher matrix size	LED
All CrossPoint Ultra	Yes	Comparable to IPL
MAV Plus 88, 128, 816, 164,		modes 3, 4, and 5
168, 1212, 1616, 248, and 328		Hard reset (IPL mode 1)
All CrossPoint 450 Plus	No	Whole switcher reset
MAV Plus 2412, 2424, 3216,		Absolute reset
and 3232		Hard reset

LANRESET

For different reset levels, press and hold the button while the switcher is running or press and hold the button while you apply power to the switcher. The Reset button is recessed, so use an Extron Tweeker, a pointed stylus, or a ballpoint pen to access it.

CrossPoint and MAV Series Matrix Switchers • Operation 78