Extron electronic 450 manual Example 1 Create a set of video and audio ties

Example 1: Create a set of video and audio ties

In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the front panel indications that result from your action.

1.Clear all selections: Press and release the Esc button.

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button flashes once.

2.Select video and audio for the tie: If necessary, press and release the RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button and the Audio button to light both.

I / O

RGBHV AUDIO

Press the RGBHV or Video button to toggle on and off. The button lights green when selected.

Press the Audio button to toggle on and off. The button lights red when selected.

3.Select an input: Press and release the input 5 button.

Press and release the Input 5 button.

The button lights amber (matrix sizes up to 1616) or green (matrix sizes 2412 through 3232).

1 2 3 4 5 6 7 8 15 16 17 18 19 20 21 22 23 24 31 32

I

N P U T S

4.Select the outputs: Press and release the output 3, output 4, and output 8 buttons.

Press and release the Output 3, Output 4, and Output 8 buttons.

The buttons blink amber to indicate that the selected RGBHV or video and audio input will be tied to these outputs.

									O	C O N T R O L
1	2	3	4	5	6	7	8	15 16
									U	ENTER PRESET VIEW	ESC
									T
									P
17	18	19	20	21	22	23	24	31 32	U
									T	The Enter button blinks
									S	green to indicate the need to
										confirm the change.

NOTE: You can cancel the entire set of ties at this point by pressing and releasing the Esc button. The Esc button flashes once.

5.Confirm the change: Press and release the Enter button.

Press the Enter button to confirm the configuration change.

ENTER

All input buttons and output buttons return to unlit or background illumination.

The Enter button returns to unlit or background illumination.

CrossPoint and MAV Series Matrix Switchers • Operation 43