Extron electronic 450 manual EX*X@*1VC NX!n+1...X!n+15Vid

Command and Response Table for SIS Commands (continued)

Command Function	SIS Command	Response	Additional description
	(Host to Unit)	(Unit to Host)

View ties, gain, volume, mutes, and presets (continued)

View output mutes EVM}

Example:EVM}

CrossPoint 450 Plus 3232 HVA

X1@1X1@2 ... X1@n]	Each X1@ response is the mute status
	of an output, starting from output 1.
	n = the maximum number of outputs.

Mut00001000000230000000000000000000]

Output 5 video, output 12 audio, and output 13 video and audio are muted. All other outputs are unmuted.

NOTE: The “Mut” portion of the response appears only when the switcher is in Verbose mode 2 or 3. See the Verbose mode command on page 109.

View video global preset	EX(*X@*1VC}	X!n•X!n+1•...•X!n+15•Vid]
configuration		Show preset X( video configuration.
		Show the input (X!) tied to 16 sequential
		outputs, starting from output X@.
Command description:	preset #*starting output # (StO#)*1(=video)VC
Response description:	input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO+2• ... •I# tied to StO+15•Vid]

NOTES:

•The starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller.

•EX(*X@*1VC} where X( = 0 returns the current video configuration of the switcher.

Example:

MAV Plus 3232

View audio global preset configuration

E4*17*1VC}

input 24 tied to output 19 no tied input input 8 tied to output 29

Response = tied input: 08•08•24•08•08•29•29•00•08•01•01•01•08•08•08•08•Vid

Output: 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Each position shown in the response is an output: left = starting output (17), right = starting output +15 (32). The number in each position is the input tied to that output.

In this example, preset 4, video input 1 is tied to outputs 26 through 28; input 8 is tied to outputs 17, 18, 20, 21, 25, and 29 through 32; input 24 is tied to ouput 19; and input 29 is tied to outputs 22 and 23. No input is tied to output 24.

EX(*X@*2VC} X!n•X!n+1•...•X!n+15•Aud]

Show preset X( audio configuration. Show the input (X!) tied to 16 sequential outputs, starting from output X@.

Command description:preset #*starting output # (StO#)*2(=audio)VC

Response description:input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15•Aud]

NOTES:

•The starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller.

•EX(*X@*2VC} where X( = 0 returns the current audio configuration of the switcher.

Example:

E15*1*2VC}

MAV Plus 2412

input 1 tied to output 3

no tied input

no outputs

Response = tied input: 01•01•01•01•02•22•22•00•03•03•03•03•--•--•--•--•Aud

Output:

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

Each position shown in the response is an output: left = starting output (1),

right = starting output +15 (16). The number in each position is the input tied to that output.

(Outputs 13 through 16 are not present on the MAV Plus 2412.)

In this example, preset 15, audio input 1 is tied to outputs 1 through 4; input 2 is tied to output 5;

input 3 is tied to outputs 9 through 12; and input 22 is tied to outputs 6 and 7. No input is tied to

output 8. Outputs 13 through 16 are not present on this switcher.

NOTE: X! = Input number (for tie)

00 – (maximum number of inputs for your model)

(00 = untied)

X@ = Output number

01 – (maximum number of outputs for your model)

X( = Global or room preset number

00 - 32 (00 = current configuration for view

only)

X1@ = Video/audio mute:

0 = no mutes

1 = video mute

2 = audio mute

3 = video and audio mute

CrossPoint and MAV Series Matrix Switchers • Programming Guide 100