Extron electronic 450 manual RGB and Audio Settings

The page displays the input and output buttons for inputs and outputs on installed boards only.

Select and switch an input as follows:

1.Click the Video Only, Audio Only, or Video & Audio button to select video, audio, or both for switching (audio follow or audio breakaway). Each mouse click on a button toggles the other two buttons off.

2.Move the mouse over the matrix of input and output selection buttons. Click a button to:

•Create a pending tie (if a tie does not exist) or pending untie (if a tie exists) of the input and output associated with that button. A “P” (for pending) appears in the button.

•Create pending untie (if a tie exists) of the input and output associated with that button.

NOTES:

•If you lose track of the input and output associated with a specific button, let the mouse rest over one of the tie buttons for a moment. A field pops up (as

shown on figure 91) that identifies the input and output for that button.

•To tie an input to all outputs, click that input number.

3.Click the Take button to make the configuration changes or the Cancel button to abandon the configuration changes.

RGB and Audio Settings Page

The RGB and Audio Settings page provides a way to set the input audio gain and attenuation, set the output volume, mute and unmute all video and audio outputs, and (for CrossPoint switchers only) set the RGB delay (switching interval). Access the RGB and Audio Settings page (see figure 92) by clicking the RGB & Audio Settings link on the Set and View Ties page.

Figure 92. RGB and Audio Settings Page

CrossPoint and MAV Series Matrix Switchers • HTML Operation 143