Extron electronic 450 manual Html Operation

HTML Operation

The CrossPoint or MAV Plus Matrix Switcher can be remotely controlled via:

•SIS commands (see Programming Guide, beginning on page 89)

•The Matrix Switchers Control Program (see Matrix Software, beginning on page 110).

•Built-in HMTL pages (see below)

This section introduces using the built-in HTML pages to operate the CrossPoint or MAV Plus Matrix Switchers, including:

•Download the Startup Page

•Status Tab

•Configuration Tab

•File Management Tab

•Control Tab

The switcher can be controlled and operated through its LAN port, connected via a LAN or WAN, using a web browser such as the Microsoft Internet Explorer. The display in the browser of the status or operation of the switcher has the appearance of web pages. This chapter describes the factory-installed HTML pages, which are always available and cannot be erased or overwritten.

NOTE: If your Ethernet connection to the matrix switcher is unstable, try turning off the proxy server in your Web browser. In Microsoft Internet Explorer, click Tools > Internet Options > Connections > LAN Settings, uncheck the Use a proxy server... box, and then click OK.

CrossPoint and MAV Series Matrix Switchers • HTML Operation 131