Has the scanner been left out of operation for a long time
after being powered on?
Yes
No 
Is the display still turned off even after you turned the
power back on?
No
Yes
The scanner is in power saving mode.
Resume from power saving mode by one of the following methods:
zLoad a document in the ADF paper chute
zPress any button on the operator panel
(Note that pressing the [Power] button for more than two seconds will turn the power off.)
zPerform scanning from the scanner driver
The scanner is operating correctly.
If the problem persists, check the items in "8.4 Before You Contact the Scanner Service Provider" (page 121) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
106