Chapter 5 Various Ways to Scan

5.5 Customizing the Scanner Settings

Using a Button on the Scanner to Start Scanning

6 Click the [Events] tab and select an event.

The [Scan/Stop] and [Send to] buttons on the operator panel

can be configured to perform scanning by simply pressing the

button.

To configure this setting, you first need to assign an

application to be launched for each button.

Computer setup

1 Confirm that the scanner is connected to your computer, then power on the scanner.

For details, refer to “Connecting the Cables” in Getting Started.

2 Select the [Start] menu J [Control Panel].

DThe [Control Panel] dialog box appears.

3 Click the [Hardware and Sound] icon.

DThe [Hardware and Sound] dialog box appears.

From the [Select an event] drop-down list, select an event from which you want to launch an application.

In this function, the following events can be selected:

z[Scan Button] (press the [Scan/Stop] button)

4 Click the [Scanners and Cameras] icon.

z [Send to 1] to [Send to 9] (press the [Send to] button while a

D The [Scanners and Cameras] dialog box appears.

number from 1 to 9 is displayed on the Function Number

Display)

 

5 Display the properties of the scanner.

Double-click the scanner icon.

78