Chapter 7 Replacing the Consumables

7.1 Consumables and Replacement Cycles

The following table shows the consumables used for the scanner.

Name

Part No.

Suggested replacement

 

 

cycle

 

 

PAD ASSY

PA03586-0002 50,000 sheets or one year

PICK ROLLER

PA03586-0001 100,000 sheets or one year

Consumables need to be replaced periodically.

It is recommended that you keep a stock of new consumables and replace them before it reaches the end of the consumable life. The scanner records the number of sheets scanned after replacing the consumables (for pad assy and pick roller), which allows you to check the status on each consumable. To check the status on the usage of the consumables, refer to "9.4 Settings Related to Page Counters" (page 137).

Note that the suggested replacement cycles are guidelines for

using A4/Letter (80 g/m2 [20 lb]) wood-free or wood-containing paper, as these cycles vary depending on the type of papers scanned and how often the scanner is used and cleaned.

Only use the specified consumables.

To purchase the consumables, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.

Please note that some parts (other than the consumables) need to be replaced by a service engineer, depending on the type of documents scanned and how often the scanner is used. For more information, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.

92