Chapter 2 How to Load Documents
How to Load Documents
Make sure to keep the documents within the limit which is indicated by the line on the inside of each side guide.
1 Pull out the chute extension 1 and chute extension 2 | Line | Side Guide |
according to the length of the document. |
|
|
For details, refer to "1.5 Setting Up the ADF Paper Chute" (page 20).
2 Load the document in the ADF paper chute.
Set the document with its front side (scanning side) facing the ADF paper chute.
3 Adjust the side guides to the width of the document.
Set the side guides so that there is no space left between the side guides and the document. Otherwise, the document may be fed skewed.
Side Guide
Remove all paper clips and staples. Reduce the amount ！ of documents if a multifeed or pick error occurs.
28