Chapter 9 Operational Settings
Item | Description | Parameter/Value | Factory Default |
|
|
|
|
Intelligent Multifeed | When there is a paper of the same size attached to | Manual mode / Auto mode 1 / Auto mode 2 | Manual mode |
Function | a designated location on the page, configure the |
|
|
| scanner to memorize the location of the attachment |
|
|
| and not detect multifeeds for that location. |
|
|
| Note that you first need to select [Check |
|
|
| Overlapping (Ultrasonic)] or [Check Overlapping |
|
|
| and Length] in either the scanner driver’s setup |
|
|
| dialog box or the multifeed detection setting in |
|
|
|
|
| |
| 145). |
|
|
|
|
|
|
| Select to clear the overlap pattern (length, location) | [Clear overlap pattern] check box | Not selected |
| memorized in Auto mode. |
|
|
|
|
|
|
| Specify whether or not to memorize the multifeed | Remember / Do not remember | Do not remember |
| pattern upon |
|
|
|
|
|
|
Number of paper | Configure this setting to change the number of | 1 to 12 times | 3 times |
feeding retries | feeding retries when a pick error occurs. |
|
|
|
|
|
|
Life Counter Alarm | Specify the replacement cycle for the consumables. | Each consumable | Pick roller: |
Setting |
| 10,000 to 2,550,000 sheets | 100,000 sheets |
|
| (in increments of 10,000) |
|
|
|
| Pad: |
|
|
| 50,000 sheets |
|
|
|
|
Power SW Control | Specify the method by which the scanner is | Enable power switch / Disable power switch / | Enable power |
| powered ON/OFF. | Enable USB power feeding | switch |
|
|
|
|
136