Chapter 9 Operational Settings

9.5 Settings Related to Scanning

Adjusting the Start Position for Scanning

2 From the listing on the left, select [Device Setting] and

[Offset/Vertical magnification Adjustment]

click the [Offset] button.

 

 

When the output position of the scanned image is not correct

 

or the image appears shortened/elongated (vertically), use the

 

following procedure to adjust the offset and the vertical

 

magnification for correction.

 

Normally, you should not have to make any adjustments as the ！ factory default settings are configured at appropriate values.

1 Start up the Software Operation Panel.

Refer to "9.1 Starting Up the Software Operation Panel" (page 125).

140