7.3 Replacing the Pick Roller
Replace the pick roller in following procedure.
1 Remove all documents from the ADF paper chute.
2 Remove the ADF paper chute.
Hold both ends of the ADF paper chute and lift it up slightly (1), then pull it out in the direction of the arrow (2).
2
1
ADF Paper Chute
3 Open the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 19).
Be careful not to have your fingers caught when the ADF closes.
4 Remove the sheet guide.
Hold the pickup tabs on both ends of the sheet guide and pull it out as you push the tabs inwards.
Sheet Guide | Pickup Tab |
5 Rotate the bushing (left). |
|
Pick Roller | Bushing |
Shaft
94