1.3 Turning the Power ON/OFF
This section explains how to power on/off the scanner.
The method by which the scanner is powered ON/OFF can be specified from one of the following:
zPress the [Power] button on the operator panel
zUnplug the power cable then plug it back in
zHave the scanner turn ON/OFF in sync with the
computer's power
For details, refer to "Method of Turning the Scanner ON/OFF [Power SW Control]" (page 152).
How to Turn the Power OFF
1 Press the [Power] button on the operator panel for more than two seconds.
DThe power is turned off, and the [Power] button switches off.
How to Turn the Power ON
1 Press the [Power] button on the scanner's operator panel.
Check
Function
Send to
Scan /Stop
Power
[Power] Button
DThe power is turned on, and the [Power] button lights in green.
During initialization, the Function Number Display of the operator panel changes as follows: "8" J "P" J "0" J "1". The scanner is ready when "1" is displayed.
When you press the [Power] button, the Check LED will flash once. Note that this is an initial diagnosis and not a malfunction.
18