Chapter 5 Various Ways to Scan

7 Select an action and an application to be launched by the scanner button event.

Click [Start this program] under [Actions], and select an application from the drop-down list on the right.

Scanner setup

Check

Function

Send to

Scan /Stop

[Send to] Button

[Scan/Stop] Button

8 Click the [OK] button.

If you are using ScandAll PRO, refer to "How to Use ScandAll PRO". For other applications, the setup of the computer is completed here. Proceed to configure the scanner settings.

zThe windows that appear and the operations differ by the operating system that you are using.

zTo configure multiple buttons, repeat steps 5 to 8.

Power

z[Scan/Stop] button

No particular setting is required.

D The specified application is launched when you press the [Scan/ Stop] button.

z[Send to] button

Press the [Function] button to change the number displayed on the Function Number Display.

Make this number match with the scanner button event configured in the computer ([Send to 1] to [Send to 9]).

For example, select "2" on the Function Number Display to perform the action configured for [Send to 2].

D The specified application is launched when you press the [Send to] button.

zFor details about the operator panel, refer to "Chapter 4 How to Use the Operator Panel" (page 48).

zThe number on the Function Number Display will change in the following order: 1, 2, 3, ... 9, C, 1, 2, 3 ...

Numbers 1 to 9 correspond to the scanner button events from "Send to 1" to "Send to 9" configured in the computer. "C" corresponds to the Software Operation Panel (fixed setting).

79