Chapter 6 Daily Care
Pad assy (×1) | 3 When you press the [Send to] and [Scan/Stop] buttons at the | ||||||
Wipe the dirt and dust off the surface of the rubber pads, downwards | same time, the feed/eject rollers rotate a certain amount. | ||||||
|
|
|
|
|
|
| |
from top to bottom. Be careful not to get your hand or the cloth caught |
| Check |
|
|
| ||
on the pick spring (metal part). |
|
|
|
| |||
|
|
|
|
|
|
| |
Ultrasonic sensor (×2) |
|
|
|
|
|
|
|
Gently wipe the dirt and dust off the surface of the ultrasonic sensors. |
| Function |
|
|
| ||
|
|
|
|
|
|
| |
Idler roller (×4) |
| Send to |
|
| [Send to] Button | ||
Gently wipe the rollers as you rotate them manually. Be careful not to |
|
|
|
|
|
| |
| Scan |
| |||||
|
|
|
| ||||
damage the roller surface. Make sure that it is cleaned properly because |
| /Stop |
|
| [Scan/Stop] Button | ||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
residue on the roller will affect the feeding performance. |
| Power |
|
|
| ||
Glass (×2)
Gently wipe the dirt and dust off the surface of the glass sections.
Pick roller (×1)
Gently wipe the roller as you rotate it downwards manually. Be careful not to damage the roller surface. Make sure that it is cleaned properly because residue on the roller will affect the feeding performance.
Feed roller (×2) / Eject roller (×2)
The power must be turned on to rotate the feed/eject rollers.
1Turn on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page 18).
2Open the ADF when "1" is displayed on the Function Number Display.
For details, refer to "1.4 Opening/Closing the ADF" (page 19).
When you press the [Send to] button and the [Scan/Stop] button at the same time, the feed rollers and eject rollers rotate together. Be careful not to touch the rollers while they are rotating.
4Put a piece of cloth/Cleaning Paper moistened with Cleaner F1 or a sheet of Cleaning Wipe against the roller surface, and wipe horizontally.
Wipe the whole surface by pressing the [Send to] and [Scan/Stop] buttons at the same time to rotate the rollers.
Make sure that it is cleaned properly because black residue on the roller will affect the feeding performance.
As a guideline, pressing the [Send to] and [Scan/Stop] buttons six times will rotate the feed/eject rollers one revolution.
4 Close the ADF.
For details, refer to"1.4 Opening/Closing the ADF" (page 19).
Confirm that the ADF is closed properly. Otherwise, the
！document may not be fed through the ADF.
89