Chapter 1 Scanner Overview

1.8 Basic Flow of Scanning Operation

This section explains about the basic flow of performing a scan.

In order to perform a scan, you need a scanner driver and an application that supports the driver.

There are two scanner drivers bundled with this scanner; "TWAIN driver" and "ISIS driver", which are compliant to the TWAIN and ISIS standards, respectively. Also bundled is an application called "ScandAll PRO" (for TWAIN/ISIS) which supports both drivers.

zFor details about the scanner drivers, refer to:

-"Chapter 3 Configuring the Scan Settings" (page 37)

-TWAIN driver Help

-ISIS driver Help

zFor details about ScandAll PRO, refer to:

-How to Use ScandAll PRO

-ScandAll PRO Help

The following describes the flow of performing a scan.

1 Turn on the scanner.

For details, refer to "1.3 Turning the Power ON/OFF" (page 18).

2 Load a document in the ADF paper chute.

Set the document with its front side (scanning side) facing the ADF paper chute.

23