Fujitsu fi-6110 4.1 Operator Panel

Chapter 4 How to Use the Operator Panel

The operator panel consists of the Function Number Display, buttons, and Check LED.

Names and Functions

Check

Function

Send to

Scan /Stop

Power

*1: For details about how to scan by pressing the [Scan/Stop] or [Send to] button, refer to the TWAIN driver Help provided in the Setup DVD-ROM or "Using a Button on the Scanner to Start Scanning" (page 78).

！	Do not use the operator panel while the Software Operation
！	Panel is running.

Check LED

Lights in orange when an error occurs.

Flashes when the ADF is open.

Function Number Display

Indicates the status of the scanner.

Switches off when the scanner enters power saving mode.

[Function] Button

Switches the number (1 to 9/C) assigned to the application launched by the [Send to] button.

[Send to] Button (*1)

Launches the linked application software.

Clears the displayed error indication.

[Scan/Stop] Button (*1)

Launches the linked application software.

Clears the displayed error indication.

Cancels the scan during scanning.

[Power] Button

Press to turn the power ON/OFF.

Lights in green when the scanner is turned on.