Chapter 5 Various Ways to Scan
Preparation before using this function
Configure the following settings before using this function:
1 Start up ScandAll PRO and select the [Scan] menu J [Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear, check the setting in ScandAll PRO by clicking the [Tool] menu J [Preferences] to open the [Setup] dialog box, then confirm that [TWAIN] is selected for [Device Driver] in the [Scan] tab.
2 Click the [Option] button.
DThe [Option] dialog box appears.
3 Select the [Job/Cache] tab, and select [Check Overlapping (Ultrasonic)] or [Check overlapping and length] for [Multifeed Detection] under [ADF Option].
4 Select the [Startup] tab, and then select the [Enable Scanner Panel] and [Enable [Scan] Button] check boxes.
5 Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
6 In the [TWAIN Driver (32)] dialog box, click the [OK] button.
DThe settings are saved.
83