Chapter 9 Operational Settings
9.6 Settings Related to Multifeed Detection
Method of Multifeed Detection [Multifeed] | 2 From the listing on the left, select [Device Setting 2] J | |
| [Multifeed]. | |
Multifeed is an error where two or more sheets are fed through | ||
| ||
the ADF at once. It is also called a multifeed when a different |
| |
document length is detected. |
| |
Not noticing multifeed errors while scanning may put you in a |
| |
situation where important data are missing from the scanned |
| |
images. |
| |
Multifeed detection function is equipped to prevent such |
| |
troubles. When this function is enabled, an error message is |
| |
displayed as soon as it detects a multifeed, and stops the |
| |
scan. Note that multifeed cannot be detected within 30 mm |
| |
from the leading edge of the document. |
| |
1 Start up the Software Operation Panel. |
|
Refer to "9.1 Starting Up the Software Operation Panel" (page 125).
145