Chapter 9 Operational Settings
Item | Description | Parameter/Value | Factory Default | |
|
|
|
| |
Multifeed | Specify a method for multifeed detection. Detect | None / Check Overlapping (Ultrasonic) / | None | |
| multifeeds by monitoring the overlap, document | Check Length / Check Overlapping and Length |
| |
| length, or the combination of both. |
| Length: 10 mm | |
| This setting can also be configured from the | Length: 10 / 15 / 20 mm |
| |
| scanner driver's setup dialog box. Note that priority | (for detection by document length) |
| |
| is given to the scanner driver setting. |
|
| |
|
|
|
| |
Page Edge Filler | Specify a width for the margin around the edge of | Top / Left / Right: 0 to 15 mm | Top/Bottom/Left/ | |
(ADF) | the scanned image to fill in white. | Bottom: | Right: 0 mm | |
| With TWAIN driver, this setting can also be |
|
| |
| configured from the scanner driver's setup dialog |
|
| |
| box. Note that priority is given to the setting with a |
|
| |
| larger value. |
|
| |
|
| (A: image, B: filled area, A+B: output) |
| |
|
|
|
| |
Dropout color | Select a color to be removed from the scanned | Red / Green / Blue / None | Green | |
| image (only available in black & white or grayscale |
|
| |
| mode). |
|
| |
| With TWAIN driver, this setting can also be |
|
| |
| configured from the scanner driver's setup dialog |
|
| |
| box. Note that priority is given to the scanner driver |
|
| |
| setting. |
|
| |
| With ISIS driver, the scanner driver setting is |
|
| |
| enabled at all times. |
|
| |
|
|
|
| |
Document check area | Selected range: Select this item to restrict the area | [Selected area] check box | Not selected | |
specification for | to run multifeed detection. |
|
| |
Multifeed Detection |
|
|
| |
Enable / Disable (Middle): Specify whether to enable | Enable / Disable | Disable | ||
| ||||
| or disable multifeed detection in the selected area. | (When [Selected range] is selected) |
| |
|
|
|
| |
| Start (Middle): Specify the start position of the area | 0 to 510 mm (in increments of 2) | 0 mm | |
| in length (mm) from the leading edge of the |
|
| |
| document. |
|
| |
|
|
|
| |
| End (Middle): Specify the end position of the area in | 0 to 510 mm (in increments of 2) | 0 mm | |
| length (mm) from the leading edge of the document. |
|
| |
|
|
|
|
135