Chapter 1 Scanner Overview
1.7 Resuming from Power Saving Mode
Power saving mode keeps the power consumption low when the scanner has not been used for a certain period of time. If the scanner is left powered on for 15 minutes without being used, it automatically enters power saving mode.
When it enters power saving mode, the Function Number Display on the operator panel switches off but the [Power] button remains lit in green.
To resume from power saving mode, perform one of the following:
zLoad a document in the ADF paper chute
zPress any button on the operator panel
*Note that pressing the [Power] button for more than two seconds will turn the power off.
zPerform scanning from the scanner driver
The waiting time for entering power saving mode can be changed in the Software Operation Panel.
For details, refer to "Waiting Time to Enter Power Saving Mode [Power saving]" (page 151).
22