1-4 Carrying
Always hold the main unit while carrying this product.
If it is carried by the cover or parts and not the main unit, the product may be damaged or dropped. Force must not be applied to the drive cover during carrying because it is made of plastic.
1-5 Storage and transportation
Store and transportation this product under the conditions listed in Table
Table 1-5-1 Storage and transportation environment
Item |
| Specifications | |
|
|
| |
Storage temperature | Condensation or formation of ice must not | ||
Transportation tem- | be caused by sudden temperature | ||
perature |
| ||
| changes. | ||
|
| ||
Relative humidity | 5 to 95% *1 |
| |
|
|
| |
| The product must not be exposed to dust, direct sunlight, corrosive gas, | ||
Atmosphere | inflammable gas, oil mist, vapor, water drops, or vibration. | ||
| There must be no salt in the atmosphere. | ||
Air pressure | 86 to 106kPa (During storage) | ||
70 to 106kPa (During transportation) | |||
| |||
*1 A large change in temperature within this humidity range may cause condensation or forma- tion of ice. Do not store this product at a place where such changes occur.
[Storage precautions]
1Do not locate this product directly on a floor; place it on a rack or shelf. 2 To store the product in a severe atmosphere, pack it in vinyl sheet.
3 If the product must be stored at a place where it may be affected by humidity, insert a drying agent such as silica gel and pack it in vinyl sheet.
