GE C11, AF-300 manual E Extension Terminal Functions, C Control Functions of Frequency

Change during operation: N = impossible, Y* = possible (enabled by using

FUNC DATA

), Y= possible (enabled by using )

E: Extension Terminal Functions

Func-						Change
tion				Min.	Factory		User
	Name	Setting range	Unit			during
code				unit	setting		setting
						operation
No.
E01	X1 terminal function	Use the code values listed below to se-	-	-	0	N
	X2 terminal function	lect [X1], [X2] and [X3] terminal func-
E02			-	-	2	N
	X3 terminal function	tions.
E03			-	-	3	N
		0: Multistep frequency 1 (SS1)
		1: Multistep frequency 2 (SS2)
		2: Coast-to-stop command (BX)
		3: Alarm reset (RST)
		4: External alarm (THR)
		5: Write enable command for keypad
		(WE-KP)
		6: PID control cancel (Hz/PID)
		7: Link operation selection (LE)

C: Control Functions of Frequency

Func-					Factory	Change
tion	Name	Setting range		Min.			User
			Unit			during
code				unit	setting		setting
						operation
No.
C01	Jump frequency 1	0 to 120Hz	Hz	1	0	Y
C02	2			1	0	Y
C03	3			1	0	Y
C04	(Hysteresis)	0 to 30Hz	Hz	1	3	Y
C05	Multistep frequency 1	0.0 to 120Hz	Hz	0.1	0.0	Y
C06	2			0.1	0.0	Y
C07	3			0.1	0.0	Y

-35-