GE C11, AF-300 manual Selecting Function, Fundamental functions

Change during operation: N = impossible, Y* = possible (enabled by using

FUNC DATA

), Y= possible (enabled by using )

5 Selecting Function

5-1 Function Selection List

Table 5-1-1 Table of Function Selection List

F: Fundamental functions

Func-							Factory	Change
tion	Name	Setting range				Min.			User
					Unit			during
code						unit	setting		setting
								operation
No.
F00	Data protection	0: Data change enabled,			-	-	0	N
		1: Data protected
F01	Frequency command	0:Key operation (	,	key)
		1:Voltage input (terminal [12])
		(0 to +10Vdc, 0 to +5Vdc)
		2:Current input (terminal[C1])			-	-	4	N
		(4 to 20mAdc)
		3:Voltage input + current input
		(terminals[12]+[C1])
		4:Analog (VR built in drive)
F02	Operation method	0: Keypad operation
		1: Terminal operation (STOP key active)
		2: Terminal operation (STOP key inactive)			-	-		N
		3: Terminal operation (STOP key active)					0
		with GE software
		4: Terminal operation (STOP key inactive)
		with GE software
F03	Maximum output fre-	50 to 120Hz			Hz	1	60	N
	quency
F04	Base frequency	25 to 120Hz			Hz	1	60	N
F05	-	Data cannot be changed.			-	-	0	-
F06							0
F07	Acceleration time	0.0 to 60.0s			s	0.1	6.0	Y
		0.01 second is set when 0.0 is specified.
F08	Deceleration time	0.1 to 60.0s			s	0.1	6.0	Y
F09	Torque boost	0,1 : Variable torque
		characteristic			-	1	13	Y
		2 to 31: Constant torque
		characteristic

-33-