GE C11, AF-300 manual F17 Gain for frequency setting signal, F18 Bias frequency, 1 2 to 1 2, 100%

Change during operation: N = impossible, Y* = possible (enabled by using

FUNC DATA

), Y= possible (enabled by using )

F17 Gain

(for frequency setting signal)

Factory	Change during
setting	operation
0	N

This function outputs the frequency obtained by multiplying the reference frequency by a ratio.

This function selects an analog input signal level with a value from							1	to
	4	that is set by function	F	0	1	.

0 The maximum frequency is output at +10Vdc (20mA dc).

1 The maximum frequency is output at +5Vdc (12mAdc).

When this function is used with function F 1 8 (bias frequency ), the gain set with this function is

valid and the gained frequency is biased.

100%	1	0
Frequency
setting
0	+5	+10Vdc
4	12	20mAdc

F18 Bias frequency

Factory	Change during
setting	operation
0	Y

This function outputs a frequency biased for the analog frequency setting.

-1 2 0

to

1 2 0

-120 to 120Hz can be set with a resolution of 1Hz.

100%

Frequency set- ting

Bias (positive)

0%

0

4

+10Vdc

Bias (negative) 20mAdc

-47-