GE C11, AF-300 manual Optional Functions, Serial communication option

Change during operation: N = impossible, Y* = possible (enabled by using

FUNC DATA

), Y= possible (enabled by using )

O: Optional Functions

Function								Min.	Factory	Change	User
	Name					Setting range	Unit			during
code No.								unit	setting		setting
										operation
o00	RTU Option	0	: Inactive 1 : Active				-	-	0	Y*
o01	Address	1 to 247 (Max – 31 Drives)							1	Y*
o02	Mode select on no response	0	:		Er8 by 8 times communiction/checksum				0	Y*
	error				errors
		1	:		Er8 by 8 times communiction/checksum
					errors
		2	:		Er8 with no communication more than
					timer (o03)
		3	:		Retry and keep running
o03	Timer	1	to 60 s				s	1	2	Y*
o04	Baud rate	1	: 9600		2 : 4800		-		1	Y*
		3: 2400
o05	Data length	0	: 8 bits		(Fixed)		-		0	Y*
o06	Parity check	0	: No checking				-		0	Y*
		1 : Even parity,				2 : Odd parity
o07	Stop bits	0 : 2bits			1 : 1bit		-		0	Y*
					(Automatically changed by o06 setting)
o08	No response error detection	0	: (No detection)				s	1	0	Y*
	time	1	to	60 s
o09	Response interval	0.00		to	1.00 s		s	0.1	0.01	Y*
o10	RTU Frequency Command	0	: F01 setting is active				-		0	N
		1	: RTU setting is active
o11	RTU Operation Command	0	: F02 setting is active				-		0	N
		1	: RTU setting is active

Note: For details on “o01” to “o11”, refer to the instruction manual that came with the optional RS485 RTU

serial communication option.

-37-