4-2 Operating Keypad Panel
1) Switching monitor
The display can be switched between frequency display and output current display by pressing the DATAFUNC in Operation mode.
FUNC
DATA
6 
0. 
0
| FUNC |
Frequency *1 | DATA |
|
1. 
2 
A
Current *2
*1 Frequency is displayed as a percentage with the least significant digit in PID control operation (function H20 is set to 1 or 2):
1 
0. 
0. for 10%
1 
0 
0. for 100%
*2 The reference frequency is displayed when the
key is pressed in current indication.
2)Stopping operation
Operation is started when the RUN is pressed, and is stopped when the STOP is
pressed while function | F |
| 0 |
| 2 | is set to |
|
|
|
| 0 | , |
|
|
|
| 1 | ,or |
|
|
|
| 3 | . |
The rotation direction is:
Forward rotation with
3)Changing frequency
The frequency increases when the 
is pressed and decreases when the 
is
pressed while function F 0 1 is set to | 0 . | |
|
|
|
The change speed is increased when the | FUNC | is pressed at the same time as the |
| DATA |
|
or 
.
Note: Do not turn the power off for five seconds after monitor switching or function setting, to prevent Er1 occurrence.
